We redesigned this kit to make it more effective at delivering water where your plants need it most, and to make assembly and disassembly easier. The new star of the show is Emitter Tubing, which we learned about from landscaping gurus Robert Kourik and Lee Reich. This tubing makes it a cinch to supply each plant with two or more emitters, and it minimizes leaking and clogging.
This kit will irrigate up to 10 trees spaced every 25'. If you’re irrigating bushes, shrubs, or canes with closer spacing, you’ll want additional fittings to match the number of plants. Setup instructions are included. Email ogs@fedcoseeds.com for help.
Get started from the spigot with:
Vacuum breaker to prevent backflow into your water system
200 mesh drip filter
40 psi pressure regulator
2 Mainline Hose Beginnings to connect from spigot or garden hose to mainline
200' of ½" polyethylene mainline tubing
50' Emitter tubing with 18" spacing
Hose Y w/ valves
2 L-couplers
8 T-couplers
10 Figure-8 ends
50 Earth Staples
Requires two 25-ft garden hoses (not included).